|
Copier Repair Tips > Copier Troubleshooting and Repair Tips > Copier Tips & Problems TIP>> Adding toner (two prong vs. one prong toner bottle) Be careful with the toner bottles going in the Minota 2152 and 2120 copiers vs. the ones going to the 1030 and 1031 copiers. they are not the same.
TIP>> The 2152 has two types of toner bottles, one has 1 prong in it, the other has 2. If you put the wrong one in the imaging unit, it will not turn. If it does, it may cause gears to break, poor copy quality ect
TIP>> Make sure you order the appropriate one. Even yif you don't have a service contract, you are better off getting the toner from Minolta itself
TIP>> If you want to add toner manually when you have light copies, turn the copier OFF, then turn it back on wile holding the stop button. this will force the toner cartridge to go in a replenising cycle. Do that a couple of times, you will notice a little improvement in the copy quality.
TIP>> Only perform the previous tip when the copier is giving light copies
TIP>> Make sure the paper guides are adjusted properly in the tray before making copies of it will jam like crazy
If you have any more questions, please post it on out forum
REPLY to this article | 4 Comments
Also read these articles
Reader Comments (4)
Yxvqszo says:
Re: Special Tips For The Minolta 2152 / 1030 / 1031 /...
AUXrc7 tcgzkjwsrqnw
Xrnlkqwpue says:
Re: Special Tips For The Minolta 2152 / 1030 / 1031 /...
G27nRS zucjsvmgrepl
Essie says:
Re: Special Tips For The Minolta 2152 / 1030 / 1031 /...
Home run! Great sulggnig with that answer!
Jhun says:
Re: Special Tips For The Minolta 2152 / 1030 / 1031 /...
What would be the solution for minolta 210 after i change the drum error appear cof30
thnx for the help
Leave a Reply
Return from Minolta 2152 1030 1031 2120 to Copier Tips & Problems
|